陶宁 副教授
|
|
|
  |
所属学科 |
光学 |
  |
研究方向 |
红外热波无损检测 |
招生方向 |
光学、光学工程 |
|
联系方式 |
ningtao-phy@cnu.edu.cn |
|
|
|
|
|
|
陶宁,首都师范大学,物理系,副教授。2005年于中国科学技术大学获得物理电子学专业博士学位,博士期间在中科院高能所合作从事北京谱仪III数据获取方面的工作。之后在首都师范大学物理系从事红外热波无损检测技术方面的研究。2014年公派美国阿贡国家实验室访问学者一年。在国内外权威核心刊物上发表论文20余篇,曾获国家发明专利2项,多项国家标准起草人之一。曾主持国家自然科学基金青年项目。
红外热波无损检测技术及应用
C程序设计
C程序设计实践
2012年首都师范大学优秀本科毕业论文指导教师
2010-2012年度首都师范大学教育实习优秀指导教师
2006-2008年度首都师范大学教学实习优秀指导教师
[1] N.Tao, X.L.Li, J.G.Sun, Simultaneous Measurement of Thermal Conductivity and Heat Capacity by Flash Thermal Imaging Methods, Review of Scientific Instruments , 2017 , 88 (6) :064903
[2] 李晓丽, Sun Jian-Gang, 陶宁, 曾智, 赵跃进, 沈京玲, 张存林,非线性拟合方法用于透射式脉冲红外技术测试碳/碳复合材料的热扩散系数,物理学报,2017,66(18):188702
[3] J.G. Sun, N. Tao, Thermal Property Measurement for Thermal Barrier Coatings Using Pulsed Thermal Imaging – Multilayer Analysis Method, The 42nd Annual Review of Progress in Quantitative Nondestructive Evaluation, July 25-31, 2015, Minneapolis, Minnesota, USA
[4] Z Zeng, N Tao, L Feng, Y Li, Y Ma, Breakpoint detection of heating wire in wind blade moulds using infrared thermography, C Zhang, Infrared Physics & Technology, 2014 , 64 (5) :73-78
[5] , Z Zeng, N Tao, L Feng, C Zhang, X Han, Developing signal processing method for recognizing defects in metal samples based on heat diffusion properties in sonic infrared image sequences, Optical Engineering, 2013 , 52 (6) :061309
[6] 曾智, 陶宁, 冯立春, 张存林,基于对数二阶微分极小峰值时间的测厚方法研究,物理学报,2013,62(13):138701-138701
[7] 黄新萍,陶宁*,蒋玉龙,王中华,张存林,蜂窝缺陷的红外无损检测及有限元模拟,光学学报,2013,33(6):95-101
[8] Zhi Zeng, Ning Tao*, Lichun Feng, Cunlin Zhang, Specified value based defect depth prediction using pulsed thermography, J. Appl. Phys. 112, 023112 (2012)
[9] 陶宁, 曾智,冯立春,张存林,基于反射式脉冲红外热成像法的定量测量方法研究,物理学报,2012,61(17)
[10] Ning Tao, Zhi Zeng, Lichun Feng, The application of the non-contact thermosonics in composites detection, Review of Progress in innovation of high performance composites for low-carbon and energy saving, 2012.9
[11] 陶宁,曾智,冯立春,孔德娟,张存林. 基于脉冲红外热像法的表面下识别的有限元模拟[J]. 中国激光, 2012, 39(11): 1108010
[12] 陶宁,曾智,冯立春,李越,张存林,采用脉冲红外成像法的表面下暗藏物蓄热系数的测量,红外与激光工程,2011,40(11)
[13] TAO Ning, ZENG Zhi, FENG Lichun, et al., The application of pulsed thermography in the inspection of wind turbine blades, Proc. of SPIE, vol.8193, 2011
[14] TAO Ning, ZENG Zhi, FENG Lichun, et al., Noncontact ultrasonic excitation thermography inspection technique, Proc. of SPIE, vol.7854, 2010
[15] 孔德娟,陶宁*,红外热波检测中热像信号重建引起的伪缺陷现象,无损检测,2011, 33(12)
[16] Zhi Zeng, Chunguang Li, Ning Tao, Lichun Feng, Cunlin Zhang, Depth prediction of non-air interface defects in pulsed thermography, NDT&E International 48 (2012) 39–45
[17] Zhi Zeng, Jing Zhou, Ning Tao, Lichun Feng, Cunlin Zhang, Absolute peak slope time based thickness measurement using pulsed theromgraphy, Infrared Physics & Technology 55 (2012) 200–204
[18] Zhi Zeng, Jing Zhou, Ning Tao, Lichun Feng, Cunlin Zhang, Xiaoyan Han, Support vector machines based defect recognition in SonicIR using 2D heat diffusion features, NDT & E International, 47(2012), 116–123